7 Things to Know Before Purchasing a Furnace in Cleveland

Buying a new furnace may not be a priority right away. But it’s smart to know the things that will likely impact your selection when you’re ready to buy. Here are seven things you’ll want to think about when it’s time for furnace replacement in Cleveland.

1. Size and Installation Quality

To run at peak efficiency and comfort, your furnace must be correctly sized for your home. When it comes to furnaces, bigger is definitely not better. We often get requests from customers to purchase a big furnace in the misguided belief that a larger furnace is either more reliable or will offer better comfort.

The opposite is true. Large furnaces will short cycle, or constantly turn on and off. This leaves you uncomfortable, with higher energy bills and a furnace that could need replacing much sooner.

This is why it’s crucial to work with the right company when buying a new furnace. Even if it’s the right size but installed wrong, the U.S. Department of Energy says you could forfeit as much as 30% of your energy efficiency.

Another crucial component of installation is ductwork. If yours is old or designed wrong, you might have issues with noise or comfort. A furnace is only as good as the duct system it’s linked to.

At Service Experts Heating & Air Conditioning, our Expert HVAC technicians are ACE certified, which means they’re skilled in repairing and installing various kinds of home comfort systems. In addition to technical skill, our technicians are also trained in treating you ethically. We also support our work with a 100% satisfaction guarantee for a year.*

2. Energy Efficiency

Furnaces are ranked by a term known as AFUE, or annual fuel utilization efficiency. Like miles per gallon on cars, this rates the annual gas consumption of a furnace. The higher the number, the less gas is wasted during the heating process.

If your current furnace is 15 years old, it’s likely rated well below 80 AFUE. As an example, if your HVAC system is 70 AFUE, you’re throwing away up to 30 cents of each dollar you spend on heating.

Here’s how AFUE ratings work today:

  • 80 AFUE—minimum efficiency rating in the U.S. and Canada.
  • 90 AFUE—ENERGY STAR® rating for furnaces in the U.S. South.
  • 95 AFUE—ENERGY STAR® rating for furnaces in the U.S. North and Canada.
  • 98 AFUE—highest efficiency rating available.

3. Blower Motor Technology

As you evaluate new furnaces there is one more important thing to consider: blower technology. This part circulates air throughout your home. And it also consumes a lot of electricity, so it’s important to know about your options.

There are three kinds of blowers available on furnaces nowadays. They include:

  • Standard blower motor. Furnaces that aren’t ENERGY STAR rated have a standard blower motor that’s been mostly the same for the past 30 years. This motor is the least costly and also the least energy efficient.
  • Constant torque motor. This technology finds a balance between price and energy efficiency. It provides an electrical efficiency boost over a standard motor design.
  • Variable-speed motor. The most energy-efficient furnaces can run at different speeds. Instead of running at full speed 24/7, they will quietly operate at a low or medium speed at times. This helps enhance your comfort while keeping energy costs low, both in the winter and summer. And it also keeps indoor humidity under control.

4. Sound Reduction Technology

Sound has become a very significant consideration with furnace installation, so another dramatic improvement has been keeping noise under control. Some of these features include:

  • Sealed and insulated cabinets
  • Variable-speed blower technology
  • Whisper-quiet gas burners

With this technology, you might not even be aware that your furnace is running.

5. Smart Thermostat

You probably have a programmable thermostat, but it's quite possible you probably aren’t making the most of your energy savings. These thermostats can be complicated to program, especially if your schedule changes from day to day.

A smart thermostat removes all the guesswork about energy efficiency. Many models can pick up on your temperature preferences and then create an energy-saving schedule to match. They also know when you’re home or away and will adjust your heating and cooling as necessary.

As an extra perk, you’ll also be able to monitor and adjust your settings from just about anyplace on your phone. Some models can even notify you if they detect a problem with your furnace or remind you when it’s time to replace your air filter.

6. Warranty

There’s a major difference in furnace quality and reliability. Like any large purchase, we believe it’s wisest to go with a major brand name. With a leading brand like Lennox® or Goodman®, you’ll have more assurance in the technology and that the manufacturer will stand by its product warranty over the long haul.

Furnaces usually have two primary warranty coverage areas:

  • Heat exchanger. This is the center of the furnace and the costliest component to replace. This part typically has a 20-year limited warranty or lifetime limited warranty, but this can differ based on the manufacturer and furnace model.
  • Main parts. This includes the blower motor, electronic controls, ignitors and other important parts. Warranties can range from as little as a one-year limited warranty to as much as a 10-year limited warranty.

When going over warranty coverage, it’s essential to know it's limited. So, you should make sure you get the restrictions. For example, nearly all standard manufacturer warranties only cover the price of the replacement part, not labor. And labor on a new heat exchanger could get costly.

Once your new furnace is running, make sure you finish the product registration immediately. Many manufacturers may limit the warranty term if the product registration is not done. This step is simple and usually only takes a few minutes.

7. Cost

How much does all this cost anyway? It could range from $1,700 for a basic furnace, or $5,500 or more for a high-efficiency system.

As you think about these costs and the impact to your budget, remember that unlike nearly every other appliance you may need to purchase, your new furnace may help pay for itself from the monthly energy savings it provides.

A couple of other ways to save include:

  • Replacing your air conditioner simultaneously.
  • Purchasing at the right time, such as in early fall, mid-winter and early spring. You may be able to get extra discounts and rebates during this less busy season.
  • Take advantage of rebates from the federal and state government, as well as from your local utility provider. We can help you figure out this process.
  • Finance your new furnace or sign up for our exclusive HVAC Advantage Program™. For just one low monthly fee, you’ll receive a new furnace with repairs and maintenance included.*

How Do I Know When to Replace My Furnace?

Now that you know what to search for in a new furnace, when should you replace your outdated one? Here are a few ideas from our Experts that will help you decide.

Age

Heating systems usually last 15–20 years. How long yours will last depends on whether you’ve kept up with furnace maintenance, where you live and your desired temperature. If you’re in a place with harsh winters, your furnace will run more frequently, potentially making it wear out sooner. The same applies if you like to keep your home at a hotter temperature.

Repair Frequency and Cost

Just like any appliance, as furnaces age, the potential for frequent furnace repair goes up. If your system is more than 15 years old, those repairs can be especially expensive. Common and expensive repairs on an older furnace include:

  • Blower motor failures
  • Ignition control failures
  • Heat exchanger failures

If repairs are greater than the half the cost of a new furnace, it’s generally recommended to replace it.

Energy Efficiency

Furnaces older than 15 years can be very inefficient. You could be wasting as much as 30% of the money you spend to heat your home. Excessive energy costs and the desire to reduce energy consumption are also strong reasons to think about replacing your furnace. In fact, an independent study by Decision Analyst reveals nearly 20% of homeowners who recently replaced their furnace specifically did so to lower their energy bills.

Trust Your Furnace Replacement to the Experts

It can feel intimidating trying to research furnace features on your own. Or recognize exactly when you should get a new furnace. Our Service Experts Heating & Air Conditioning Experts are here to make the process much smoother. Call us at 440-252-1375 or schedule an appointment online to request your free home comfort assessment now.


*For HVAC Service Memberships, certain warranty exclusions and limitations apply. See your signed agreement for full terms and conditions. For the Advantage Program™, please see your signed Advantage Program Agreement for full details and exclusions. Lease with approved credit; visit ServiceExperts.com for details.

Contact Us